Buying Used Proton Exora Malaysia — Checklist

• •CVTi or 6AT? — always choose 6AT; check gear selection smooth in all ranges
• •OBD scan: ATF temp, CVTi codes (if applicable), A/C compressor fault
• •Sliding doors: open/close fully in auto mode — track blockage is common
• •Cold start: no rattle beyond 5–10 seconds (chain tensioner check)
• •ATF history: changed at 40,000 km? Rough shifts = neglected ATF

Buying a Used Proton — Malaysia Checklist

For Saga/Persona: (1) Check timing belt change history — critical at 60,000 km; (2) Check for cam cover oil leaks (engine top residue); (3) Test A/C compressor (engage and check for cold air immediately). For X50/X70/X90: (1) Check 7DCT operation — smooth gear changes with no shudder; (2) Verify all ADAS systems working (AEB test at low speed); (3) Confirm DCT fluid was changed. For all models: verify service history at a Proton SC using the chassis number.